We are SPL-Lab USA Distribution
We are The Authorized Distribution Network for other brands including Taramp's.
We create Dealer Networks for our distributed products to give the public better access to the brands we carry. We have a large network dealing Taramp's.
Taramp's is the largest audio company in all of South America employing close to 300 people and moving over 150,000 products a year. Taramp's currently distributed to 14 International companies including the USA.
What we have here is a Full Bridge Rectification Technology based amplifier.
This allows the amplifier to be smaller, more efficient, less weight and less cost than most other amplifiers on the market.
This amplifier is OVER 75% efficiency @1ohm!
Do not be fooled by it's size!
Works 100% for competition and music.
This amplifier has a frequency range up to 15KHz and down to 5Hz.
This amplifier can play the deepest low frequency bass up to the loudest midrange capable and Highrange up to 15KHz!
Number of Channels - 1
RMS Power @ 13.8 VDC - 1 OHM: 3598W RMS
RMS Power @ 13.8 VDC - 2 OHMS: 2446W RMS
RMS Power @ 13.8 VDC - 4 OHMS: 1403W RMS
RMS Power @ 12.6 VDC - 1 OHM: 3000W RMS
RMS Power @ 12.6 VDC - 2 OHMS: 2040W RMS
RMS Power @ 12.6 VDC - 4 OHMS: 1170W RMS
Input Sensitivity: 250mV @ -9,78 dBm
Total Harmonic Distortion (THD) 0.3%
Signal / Noise Ratio: >95dB
Damping Factor: 300
Frequency Response (Full Range): 5Hz to 15KHz
H. P. F (High Pass Filter): 5Hz to 50Hz (-12dB / 8nd ) Variable
L. P. F (Low Pass Filter): 50Hz to 15KHz (-12dB / 8nd ) Variable
Bass Boost: 0 The 10dB (50Hz)
Input Impedance: 18K OHMS
Protection: Short in Supply Voltage Output / High / Low
Minimum Supply Voltage: 10.5 VDC
Supply Voltage: 16 VDC Maximum
Consumption at Rest: 1.70 Amp.
Maximum Consumption Musical @ 12.6VDC: 170 Amp.
Maximum Consumption in Sinusoidal Signal @ 12.6 VDC: 340 Amp.
Dimensions (WxHxD): 9.02" x 2.56" x 11.34"
Operational use provided by SPL-Lab USA Distribution-
Power Supply Range- 10.5-15.9v
Maximum Signal Gain Output Range- 10.5-14.4v (do not sustain over 14.4v under maximum output. Stressing of components over it's lifespan can occur)
MOSFET Range- Do not wire amplifier below 1ohm Nominal(=/> 0.65ohms) on 1ohm stable models or below 2ohm Nominal(=/> 1.3ohms) on 2ohm stable models
DC Voltage can be ran up to 15.9v with no problems as long as the amplifier is not under maximum load and above 14.4v while providing output for that load or deterioration of components can occur. This is considered to be Voltage Drop during playback at full output must remain below 14.4v. For instructions on how to ensure this is possible in your vehicle, contact us!